If you do not clean the dryer, dust will accumulate in the suction hole or the vent. Be careful not to leave it alone because it can cause unexpected accidents or injuries. Explains why you need to clean the dust in the dryer, how to remove the dust, and how often you need to clean it.
Do I have to clean the dust from the dryer?
What can happen if you leave the dust in the dryer?
Sometimes it gets unusually hot or sparks up.
If the dust gets stuck in the mouth, the air flow weakens. In other words, the function of the dryer itself is degraded. It may not be extremely weak, such as 100 to 0, but as the drying time gets longer, it will cost as much electricity, so dust should be removed.
It’s not just that. It is supposed to be using warm air, but it can suddenly become cold air or the warm air can become abnormally hot. When the temperature of the warm air rises, the protective device on the body (thermo switch) works and spark-like light can come out. Basically, it is not dangerous because of the protective device operation, but it will be anxious to see the spark.
Cleaning the dust from the dryer is important to enhance the performance of the dryer and at the same time to use it safely.
How to remove dust from the suction hole of the dryer.
It is the suction port that easily accumulates dust with a dryer. First, let’s explain how to remove the dust from the suction hole. Although this paper introduces a general method, dust removal and precautions may differ depending on the manufacturer or model number. Therefore, please check the instructions in advance.
How to remove dust from the suction hole.
First, turn off the dryer and pull out the power plug from the outlet. Next, you use tissue or an old toothbrush to remove the dust from the suction hole. When there is dust inside, use a vacuum cleaner to smoke. At this time, it can be torn depending on the material of the suction port. Do not use the manual when the vacuum cleaner is NG. Even if the dryer of the vacuum cleaner is OK, it is recommended to take care with a weak suction force.
Let’s keep the body clean as well.
Since it’s been a while, let’s also clean the dryer body to remove the dust from the suction hole. Dust that can be easily removed with a dry cloth is good, but if not, wet the cloth with melted soap, wring it hard, and wipe it. Alcohol or light remover may cause breakdown or discoloration, so it is better not to use it.