Things to note when removing the smell of the water bottle.
Next, I will tell you the precautions for removing the smell of the water bottle.
Chlorine bleach is not used on the body.
Chlorine bleach can be used for rubber parts such as plastic water bottles and packing. However, it is better not to use chlorine bleach when removing the smell of metal water bottles such as stainless steel. Because it can cause rust. For those who are worried, it would be safe to check if there is no manual for the water bottle or the manufacturer’s website.
Don’t use a hard brush or abrasive.
If you scrub it with a hard brush or anchovy, the dirt or smell may be removed cleanly. But at the same time, remember that it can damage the surface of the water bottle. If dirt builds up or rusts on the wound, it can not only cause smell, but also accelerate the deterioration of the water bottle. Wash gently with a sponge for a water bottle. Similarly, it is not recommended to wash with a detergent containing an abrasive such as cleanser.
Do not use the dishwasher, dryer, or boil sterilizer.
When you don’t have time, you might want to wash it with other dishes in the dishwasher. Or you’ll think of a way to boil and sterilize it with boiling water. However, hot air in hot water or dryers can cause deterioration or deformation of water bottles, far from removing odors. In order to use the precious water bottle for a long time, you should refrain from washing dishes, drying machines, and boiling disinfection.
Tips for preventing the smell of the water bottle.
If you want to prevent the smell of the water bottle, you must take care of it after use. Basically, the dirt that causes the smell of the water bottle is accumulated due to the lack of daily care. Let’s think that smell control begins with daily care.
Daily care method.
- All parts that can be removed, such as lids and packing, are removed.
- Contain neutral detergent diluted with lukewarm water in sponge.
- Washing parts that can be washed such as the outside of the water bottle body, the drinking port, and the lid.
- A sponge for a water bottle with a pattern contains detergent of ‘2’.
- Wash the inside of the water bottle.
- Each part such as the main body of the water bottle and packing is flushed immediately.
- Cut the moisture well, completely dry it and put it back.
In order to prevent the stain that causes the smell of the water bottle, it is important to remove the part every time and remove the stain from every corner. It can be annoying, but the smell is evidence of germs spreading and can cause mold if left alone. In order to enjoy the drink, let’s take care of the water bottle after using it every time.
In conclusion, it is.
The water bottle’s smell is caused by a lot of dirt. Stains become a breeding ground for germs, so don’t leave them alone when you are concerned about smells or stains. Please carefully wash the parts and parts that are difficult to wash, such as the bottom, packing, and lid, and try the method using oxygen-based bleach.