Can’t I fix it even if I adjust it? about changing the door closer.

Let’s also know how to adjust it and how to replace the door closer with a new one.

It’s a good case to change it.

  • Oil leak can be seen.
  • I have been using it for about 10 to 15 years.
  • Even if you adjust it, you will get the same symptoms right away.
  • A defect caused by a type with only one speed control valve.
  • It does not stop at the place where it is supposed to stop.

In this case, let’s consider replacing it with a new one, not adjusting it. Since the door closer cannot be released or oiled in the main body, let’s think of it as “need replacement” especially when there is oil leakage.

Although the quality has improved, it is generally believed that it will last about 10 to 15 years. Of course, it depends on the frequency of use, but if there is a problem with the door closer that has been in use for more than 10 years, you should consider replacing it.

How can I use the adjusted door closer longer?

It should be replaced when life is approaching, completely broken, or oil is leaking. But the door closer, which is not that bad and can be adjusted to a moderate degree, would be a place that wants to last as long as possible.

Although aging cannot be prevented, I would like to tell you what I can do on a daily basis to last a little longer.

What you can do on a daily basis.

If you use the door closer more often, the deterioration can be that much faster. Let’s keep in mind that we don’t open and close it unnecessarily.

Also, it can be a burden for the door closer to close by force by pulling the door by hand. If it’s in a normal condition, it will close automatically, so don’t put any pressure on it.

There are many other things you can do, such as turning the control valve when you feel uncomfortable when you close it, or oiling it when it starts to sound. Let us remember this as an opportunity to make it as long as possible.

In conclusion, it is.

When the door closes fast, slow, makes a sound, and does not stop, it may be solved by adjustment. However, if there is an oil leak, it will need to be replaced, so contact the manufacturer as soon as possible.

Categorized in: